Juniper JUNOSE 10.0.X PHYSICAL LAYER, Configuration Manual

Page: 162 / 262

■
Use to configure the T1 framing format for a T3 interface.
■
You must specify either esf (extended superframe) or sf (superframe) framing.
■
The framing format you choose must be compatible with the framing format at
the other end of the line.
■
Example
host1(config-controll)# path 12 ds3 1 t1 28 framing sf
■
Use the no version to restore the default value, esf framing.
■
See path ds3 t1 framing.
path ds3 t1 shutdown
■
Use to disable T1 channels or a subchannel.
■
T1 channels and subchannels are enabled by default.
■
Examples
host1(config-controll)# path 12 ds3 t1 5,9,14-17 shutdown
host1(config-controll)# path 12 ds3 t1 28/5 shutdown
■
Use the no version to restart a disabled interface.
■
See path ds3 t1 shutdown.
path ds3 snmp trap link-status
■
Use to enable SNMP link status processing for T1 channels or a subchannel.
■
The default disables SNMP link status processing.
■
Examples
host1(config-controll)# path 2 ds3 3 t1 28 snmp trap link-status
host1(config-controll)# path 2 ds3 3 t1 28/5 snmp trap link-status
■
Use the no version to disable SNMP link status processing for a T1 channel.
■
See path ds3 snmp trap link-status.
path ds3 t1 timeslots
■
Use to assign a range of DS0 timeslots to a subchannel as a single data stream.
■
You can specify a line speed for all DS0 timeslots assigned to a subchannel.
■
Examples
host1(config-controll)# path 2 ds3 1 t1 28 timeslots 1-10
host1(config-controll)# path 2 ds3 1 t1 28/1 timeslots 1-10 speed 56
■
Use the no version to delete the fractional T1 circuit.
■
See path ds3 t1 timeslots.
136 ■
Configuration Tasks
JUNOSe 10.0.x Physical Layer Configuration Guide