JR ProPo PCM9XII, Instruction Manual

Page: 83 / 88

MacGregor Industries
79 GLIDER
When the Countdown Timer is active, the transmitter will beep three times at 30 seconds, twice at 20 seconds, and then
once every second from 10 seconds to zero. At zero there will be a continuous tone for 1 second and then the timer will
begin counting up with a "+" indication to the left of the time display. Countdown times of up to 59 minutes 50 seconds
can be set.
When used as a Stopwatch, the timer will count up to 59 minutes 59 seconds and then roll over to zero and start again.
To set TIMER 1 as Stopwatch, highlight "INH" adjacent to "TIMER 1" by rotating the Scroll Bar and click on it to bring
up the sub menu. A browse box of the available modes appears. Rotate the Scroll Bar to select the "STOP-W" choice and
click on it to exit the sub menu. "INH" is replaced by "STOP-W" on the screen to indicate that the Stopwatch is enabled.
A new "Activation Switch" menu choice appears. Highlight the new switch choice and click on it to bring up a browse box
of the available Stopwatch Activation switches. Highlight the required Activation Switch by rotating the Scroll Bar and
click to exit the sub menu.
To set TIMER 1 as Countdown, highlight "INH" adjacent to "TIMER 1" by rotating the Scroll Bar and click on it to
bring up the sub menu. A browse box of the available modes appears. Rotate the Scroll Bar to select the "DOWN-T"
choice and click on it to exit the sub menu. "INH" is replaced by "DOWN-T" to indicate that the Countdown timer is
enabled. New "Activation Switch" and "Time" menu choices appear. Highlight the new switch choice by rotating the Scroll
Bar and click on it to bring up a browse box of the available Countdown Activation switches. Highlight the required
Activation Switch by rotating the Scroll Bar and click to exit the sub menu. Highlight the time figures by rotating the Scroll
Bar and click to bring up the sub menu. The figures are surrounded by a box to indicate that they are selected. Rotate the
Scroll Bar to set the required countdown time and click the Scroll Bar to exit the sub menu. To reset the time to the default
of 10 minutes, press the clear (CLR) key to the left of the Information Display.
To set TIMER 2 as Stopwatch, highlight "INH" adjacent to "TIMER 2" by rotating the Scroll Bar and click on it to bring
up the sub menu. A browse box of the available modes appears. Rotate the Scroll Bar to select the "STOP-W" choice and
click on it to exit the sub menu. "INH" is replaced by "STOP-W" to indicate that the Stopwatch is enabled. A new
"Activation Switch" menu choice appears. Highlight the new switch choice and click on it to bring up a browse box of the
available Stopwatch Activation switches. Highlight the required Activation Switch by rotating the Scroll Bar and click to
exit the sub menu.
To set TIMER 2 as Countdown, highlight "INH" adjacent to "TIMER 2" by rotating the Scroll Bar and click on it to
bring up the sub menu. A browse box of the available modes appears. Rotate the Scroll Bar to select the "DOWN-T"
choice and click on it to exit the sub menu. "INH" is replaced by "DOWN-T" to indicate that the Countdown timer is
enabled. New "Activation Switch" and "Time" menu choices appear. Highlight the new switch choice by rotating the Scroll
Bar and click on it to bring up a browse box of the available Countdown Activation switches. Highlight the required
Activation Switch by rotating the Scroll Bar and click to exit the sub menu. Highlight the time figures by rotating the Scroll
Bar and click to bring up the sub menu. The figures are surrounded by a box to indicate that they are selected. Rotate the
Scroll Bar to set the required countdown time and click the Scroll Bar to exit the sub menu. To reset the time to the default
of 10 minutes, press the clear (CLR) key to the left of the Information Display.
To inhibit a timer, highlight the timer type, adjacent to the required timer by rotating the Scroll Bar and click to activate
the sub menu. Rotate the Scroll Bar to select "INH" and click to exit the sub menu. The timer is inhibited.
To reset the Integral Timer , highlight the time figures below INTEG-T by rotating the Scroll Bar. A new display shows
"Push[CLR]=0:00". Press the clear (CLR) key to reset the time to zero for the current Model Memory.