JR ProPo PCM9XII, Instruction Manual

Page: 23 / 88

MacGregor Industries
19 HELI
Function Menu List - Helicopter
The Function Menu List is accessed from the Information Display Screen by pressing the LIST key.
Dual Rates & Exponential
From the Function Menu List, rotate the Scroll Bar to highlight the "D/R & EXP" menu choice and click the Scroll Bar.
•
"Dual" rates may be set for the Aileron (AILE) Elevator (ELEV) and Rudder (RUDD) channels.
•
Three different rates may be selected (Pos-0, Pos-1 and Pos-2).
•
The travel can be set between 0 and 125% with independent adjustment each side of neutral and a graphical
representation of the response curve.
•
The linearity may be varied between an exponential of -100% to +100% with independent adjustment each side of neutral
and a graphical representation of the response curve.
•
The selected rate can be enabled by the rate switches (Pos-0 and Pos-1) or by any of the Flight Modes (Pos-0 and Pos-1
and Pos-2).
To change between channels, highlight the channel menu choice (AILE on the graphic above) by rotating the Scroll Bar
and click on it to bring up the browse box with the sub menu choices. Move between the sub menu choices by rotating the
Scroll Bar. Highlight and click on the required channel to select it and return to the D/R & EXP menu.
To change the rate, highlight the required position (Pos-0 D/R, Pos-1 D/R or Pos-2 D/R) by rotating the Scroll Bar and
click on it to bring up the sub menu choices. The highlighting is surrounded by a box to indicate that it is selected. The
right hand side of the screen displays a graphical representation of the response curve. Rotate the Scroll Bar to alter the
setting. With the control stick at neutral, the figures for both sides of neutral change together. If the control stick for the
channel being adjusted is moved from neutral, the adjustment changes only for that side of neutral and only one figure is
highlighted and changed. To return the figures to the default of 100%, press the clear (CLR) key at the left hand side of the
screen. When the required setting is achieved, click the Scroll Bar to exit the sub menu.
To change the linearity, highlight the required position (Pos-0 LIN, Pos-1 LIN or Pos-2 LIN) by rotating the Scroll Bar
and click on it to bring up the sub menu choices. The highlighting is surrounded by a box to indicate that it is selected. The
right hand side of the screen displays a graphical representation of the response curve. Rotate the Scroll Bar to alter the
setting. With the control stick at neutral, the figures for both sides of neutral change together. If the control stick for the
channel being adjusted is moved from neutral, the adjustment changes only for that side of neutral and only one figure is
highlighted and changed. To return the figures to the default of linear (LIN), press the clear (CLR) key at the left hand side
of the screen. When the required setting is achieved, click the Scroll Bar to exit the sub menu.
Chapter
2