JR ProPo PCM9XII, Instruction Manual

Page: 67 / 88

MacGregor Industries
63 GLIDER
To change between channels, highlight the channel menu choice (AILE on the graphic above) by rotating the Scroll Bar
and click on it to bring up a browse box with the sub menu choices. Move between the sub menu choices by rotating the
Scroll Bar. Highlight and click on the required channel to select it and return to the D/R & EXP menu.
To change the rate, highlight the required position (Pos-0 D/R, Pos-1 D/R or Pos-2 D/R) by rotating the Scroll Bar and
click on it to bring up the sub menu choices. The highlighting is surrounded by a box to indicate that it is selected. The
right hand side of the screen displays a graphical representation of the response curve. Rotate the Scroll Bar to alter the
setting. With the control stick at neutral, the figures for both sides of neutral change together. To change the figures for
each side of neutral independently, move the control stick to the side to be adjusted. Only one figure is highlighted and
changed. To return the figures to the default of 100%, press the clear (CLR) key at the left hand side of the screen. When
the required setting is achieved, click the Scroll Bar to exit the sub menu.
To change the linearity, highlight the required position (Pos-0 LIN, Pos-1 LIN or Pos-2 LIN) by rotating the Scroll Bar
and click on it to bring up the sub menu choices. The highlighting is surrounded by a box to indicate that it is selected. The
right hand side of the screen displays a graphical representation of the response curve. Rotate the Scroll Bar to alter the
setting. With the control stick at neutral, the figures for both sides of neutral change together. To change the figures for
each side of neutral independently, move the control stick to the side to be adjusted. Only one figure is highlighted and
changed. To return the figures to the default of linear (LIN), press the clear (CLR) key at the left hand side of the screen.
When the required setting is achieved, click the Scroll Bar to exit the sub menu.
Please note that only the Flight Modes selected in System Mode - DeviceSEL will be displayed on the screen.
To select the Flight Mode rate, highlight the required Flight Mode (Cruise [CRUI], Speed [SPEE], Thermal [THRM],
Launch [LAUN] or Landing [LAND]) on the right of the screen, by rotating the Scroll Bar and click on it to bring up the
sub menu with the gain selection choices. The default is to have the rates controlled by the rate switches (SW). Rotate the
Scroll Bar to select the required Flight Mode rate (Pos.0, Pos.1, or Pos.2) and click on it to select. To return the sub menu
selection to the default of the rate switches (SW), press the clear (CLR) key at the left hand side of the screen. When the
required setting is achieved, click the Scroll Bar to exit the sub menu.
Press the LIST key to return to the Function Menu. Press the enter (ENT) key to return to the Information Display Screen.
Servo Reverse
The Function Menu List is accessed from the Information Display Screen by pressing the LIST key. From the Function
Menu List, rotate the Scroll Bar to highlight the "REV.SW" menu choice and click the Scroll Bar.
Please note that the channel names shown will depend on the selections made in System Mode - Wing TYPE.