47
UMG 96RM-PN
Parameters and measured values
All of the parameters required for operation of the UMG
96RM-PN, such as the current transformer data, and
a selection of frequently required measured values are
stored in the table.
The contents of most addresses can be accessed via
the serial interface and with the buttons on the UMG
96RM-PN.
On the device you can only enter the first 3 significant
digits of a value. Values with more digits can be entered
in GridVis.
The device only ever displays the first 3 significant digits
of the value.
Selected measured values are summarised in measured
value screen profiles, and can be displayed in Display
mode with buttons 1 and 2.
The current measured value screen profile, the current
screen rotation profile and date and time can only be
read and modified via the RS485 interface.
Example of a parameter screen
On the display of the UMG
96RM-PN the contents of
address "000" is displayed
as "001'. This parameter
describes (according to
the list) the device address of
the UMG 96 RM-PN (in this
case "001") within a bus.
Example of a measured value screen
In this example, the display
of the UMG 96RM-PN shows
each of the voltages L to N
as 230V. Transistor outputs
K1 and K2 are active and a
current can flow.
Summary of Contents for UMG 96 RM-PN
Page 123: ...123 UMG 96RM PN...
Page 128: ...128 UMG 96RM PN...
