janitza UMG 96 RM-PN, User Manual

Page: 112 / 128

112
UMG 96RM-PN
Table 2 - Modbus address list
(often needed measured values)
19000 808 float RD V Voltage L1-N
19002 810 float RD V Voltage L2-N
19004 812 float RD V Voltage L3-N
19006 814 float RD V Voltage L1-L2
19008 816 float RD V Voltage L2-L3
19010 818 float RD V Voltage L3-L1
19012 860 float RD A Current, L1
19014 862 float RD A Current, L2
19016 864 float RD A Current, L3
19018 866 float RD A Vector sum; IN=I1+I2+I3
19020 868 float RD W Effective power L1
19022 870 float RD W Effective power L2
19024 872 float RD W Effective power L3
19026 874 float RD W Sum; Psum3=P1+P2+P3
19028 884 float RD VA Apparent power S L1
19030 886 float RD VA Apparent power S L2
Modbus Address
Address
on display Format RD/WR Unit Comment
C
The addresses listed in this documentation
within the range 0-800 can be set directly
on the device.
The address range 800-999 is available
for the programming of comparators on
the device. The addresses in the range
of 1000 and above can only be edited via
Modbus!
C
A complete overview of the parameters and
measured values as well as explanations
on selected measured values can be found
in the document "Modbus Address List",
which can be found on the CD or online.