65
UMG 96RM-PN
Operating lighting (addr. 036):
The operating lighting is activated by the push of a
button or upon restart.
Standby lighting (addr. 747)
This type of backlight is activated after a customisable
period of time (addr. 746). If there are no button presses
during this period, the device switches to standby
lighting.
If buttons 1 - 3 are pressed, the device switches to
operating lighting and the defined period begins again
from scratch.
If the brightness values are the same for both types
of lighting then no change is discernible between
the backlight and standby lighting.
Addr. Description
Setting
range
Default
036
Brightness for
operating lighting
0 to 9
6
746
After how long to
switch to standby
lighting
60 to 9999
secs
900
secs
747
Brightness for standby
lighting
0 to 9
0
0 = Minimum brightness, 9 = Maximum brightness
C
DCP "Identify Station" signal of the PLC:
If the PLC sends control signals for device
identification to the device, the backlight
switches between maximum and
minimum brightness (causing the display
lighting to "flash"). To achieve this there is
usually a "Flash" button in the PLC.
Summary of Contents for UMG 96 RM-PN
Page 123: ...123 UMG 96RM PN...
Page 128: ...128 UMG 96RM PN...
