janitza UMG 96 RM-PN, User Manual

Page: 109 / 128

109
UMG 96RM-PN
Address Format RD/WR Unit Comment Setting range Default
*1 0 =Comparator group, 1=Pulse output, 2=Value from an external source (Modbus), 3=Reserved, 4=Reserved, 5=ProfiNet
*2 0=Not inverted, 1=Inverted *3 0 = No measurement of the current or voltage path. *4 The setting 8 is equal setting 0.
145 SHORT RD/WR - "Flash display" 0-3 0
Bit 1 = 1/0: active/inactive for
Comparator group output 1
Bit 2 = 1/0: active/inactive for
Comparator group output 2
200 SHORT RD/WR - Selection of source for
Digital output 1 0 - 5
*1
1
201 SHORT RD/WR - Inverter Digital output 1 0, 1
*2
0
202 SHORT RD/WR - Selection of source for
Digital output 2 0 - 5
*1
1
203 SHORT RD/WR - Inverter Digital output 2 0, 1
*2
0
500 SHORT RD/WR - Terminal assignment, I L1 -3 to 0 to +3
3)
+1
501 SHORT RD/WR - Terminal assignment, I L2 -3 to 0 to +3
3)
+2
502 SHORT RD/WR - Terminal assignment, I L3 -3 to 0 to +3
3)
+3
503 SHORT RD/WR - Terminal assignment, U L1 0 - 3 3) 1
504 SHORT RD/WR - Terminal assignment, U L2 0 - 3
3)
2
505 SHORT RD/WR - Terminal assignment, U L3 0 - 3
3)
3
506 SHORT RD/WR - Clear min and max values 0 - 1 0
507 SHORT RD/WR - Clear energy counter 0 - 1 0
508 SHORT RD/WR - Force write to EEPROM 0 - 1 0
Note: Energy values and min/max values are written to the EEPROM every 5 minutes.
509 SHORT RD/WR - Connection diagram, voltage 0 - 8
4)
0
510 SHORT RD/WR - Connection diagram, current 0 - 8 0
511 SHORT RD/WR - Relevant voltage for THD and FFT
0, 1 0
In the display, the voltages can be displayed for THD and FFT as L-N or as L-L values. 0=LN, 1=LL