57
UMG 96RM-PN
User password (addr. 050)
To make it harder to accidentally modify the programming
data, a user password can be set. You can only switch
to the following Programming menus after entering
the correct user password.
No user password is set in the factory. In this case,
the Password menu is skipped and you are taken
immediately to the Current transformer menu.
If a user password has been set, then the Password
menu appears with "000" on the screen.
The first digit of the user password flashes and can
be modified with button 2. Pressing button 1 selects
the next digit (it starts flashing).
Only when the right combination of numbers is entered,
takes you to the Programming menu for the current
transformer.
Forgot password
If you no longer remember your password, you can only
delete it using the GridVis PC software.
In order to do so, connect the UMG96RM-PN to the PC
with a suitable interface. More information can be found
in the GridVis assistant.
Summary of Contents for UMG 96 RM-PN
Page 123: ...123 UMG 96RM PN...
Page 128: ...128 UMG 96RM PN...
