19
UMG 96RM-PN
c
Attention!
Voltages that exceed the allow nominal
network voltages must be connected
via a voltage transformer.
c
Attention!
The UMG 96RM-PN is not suitable for
measuring DC voltages.
c
Attention!
The voltage measurement inputs on
the UMG 96RM-PN are dangerous if
touched!
When connecting the voltage to be measured,
the following must be observed:
Isolation device
• A suitable circuit breaker must be fitted to disconnect
and de-energise the UMG 96RM-PN.
• The circuit breaker must be placed in the vicinity of
the UMG 96RM-PN, be marked for the user and easily
accessible.
• The circuit breaker must be UL/IEC certified.
Overcurrent protection device
• An overcurrent protection device must be used for
line protection.
• For line protection, we recommend an overcurrent
protection device as per the technical specifications.
• The overcurrent protection device must be suitable
for the line cross section used.
• The overcurrent protection device must be UL/IEC
certified.
• A circuit breaker can be used as an isolating and line
protection device. The circuit breaker must be UL/IEC
certified.
• Measured voltages and measured currents must
derive from the same network.
Summary of Contents for UMG 96 RM-PN
Page 123: ...123 UMG 96RM PN...
Page 128: ...128 UMG 96RM PN...
