15
UMG 96RM-PN
Installation
Supply voltage
The UMG 96RM-PN needs a supply voltage to operate.
The supply voltage is connected on the rear side of
the device via terminal blocks.
Before connecting the supply voltage, ensure that
the voltage and frequency correspond to the details on
the rating plate!
Fig. Connection example of the supply voltage to a
UMG 96RM
Circuit breaker
Fuse
N
L
m
• The supply voltage must be connected
through a fuse according to the techni-
cal data.
• If installed in a building, a disconnector
or circuit breaker must be provided for
the supply voltage.
• The disconnector must be installed
near the device and easily accessible to
the user.
• The switch must be marked as the circuit
breaker for this device.
• Voltages which are over the permitted
voltage range can destroy the device.
Summary of Contents for UMG 96 RM-PN
Page 123: ...123 UMG 96RM PN...
Page 128: ...128 UMG 96RM PN...