88
UMG 96RM-PN
Service and maintenance
The device underwent various safety checks before
delivery and is marked with a seal. If a device is open,
then the safety checks must be repeated. Warranty
claims will only be accepted if the device is unopened.
Repair and calibration
Repair work and calibration can be carried out by
the manufacturer only.
Front film
The front film can be cleaned with a soft cloth and
standard household cleaning agent. Do not use acids
and products containing acid for cleaning.
Disposal
The UMG 96RM can be reused or recycled as
electronic scrap in accordance with the legal provisions.
The permanently installed lithium battery must be
disposed of separately.
Service
Should questions arise, which are not described in this
manual, please contact the manufacturer directly.
We will need the following information from you to
answer any questions:
- Device name (see rating plate),
- Serial number (see rating plate),
- Software release (see measured value display),
- Measured voltage and power supply voltage,
- Precise description of the error.
Device calibration
The devices are calibrated by the manufacturer at
the factory - it is not necessary to recalibrate the device
providing that the environmental conditions are complied
with.
Calibration intervals
We recommend having the device recalibrated by
the manufacturer or an accredited laboratory every
5 years approximately.
Summary of Contents for UMG 96 RM-PN
Page 123: ...123 UMG 96RM PN...
Page 128: ...128 UMG 96RM PN...
