55
UMG 96RM-PN
Set the subnet mask (SUb):
• In programming mode, button 2 takes you to
the Subnet mask settings (SUb on screen).
• Use the button 1 to select the desired digit and set it
with button 2. Repeat this step for every digit in Byte
0 to 3, the same as when setting the device's TCP/
IP address.
• Once the display returns to Byte 0 (
none of the digits
flashing) you can set the gateway.
Set the gateway address (GAt):
• In programming mode, button 2 takes you to
the Gateway address settings (GAt on screen).
• Use the 1 and 2 buttons to set the desired gateway
address in Byte 0 to 3, in the same way as the above
descriptions.
C
Changes are only applied after exiting
programming mode.
Fig. Gateway (GAt),
Byte 0, value 192
Fig. Subnet mask (SUb),
Byte 0, value 255
m
Attention!
Connection of the UMG96RM-PN to
the Ethernet may only be carried out after
consulting the network administrator!
C
Dynamic Configuration Protocol (DCP)
This function assigns unique addresses
and names to the subscribers of a
ProfiNet system, and is prioritised by
the UMG 96RM-PN.
Summary of Contents for UMG 96 RM-PN
Page 123: ...123 UMG 96RM PN...
Page 128: ...128 UMG 96RM PN...
