92
UMG 96RM-PN
Measurement range exceeded
If the measurement range is exceeded, it is displayed
as long as this persists and cannot be acknowledged.
The measurement range is exceeded if at least one of
the voltage or current measurement inputs lies outside
their specified measurement range.
The Up arrow is used to highlight in which
phase the measurement range was exceeded.
The corresponding error message for current circuit I4 is
as shown in the figure opposite.
The "V" and "A" symbols indicate whether
the measurement range has been exceeded in
the current or voltage circuit.
I
= 7 Aeff
U
L-N
= 300 V
rms
Threshold values for exceeding the measurement range:
A = Current circuit
V = Voltage circuit
Indication of the phase (L1/L2/
L3) in which the measurement
range was exceeded. An
exceedance in current circuit
I4 is shown as in the figure
opposite.
Examples
A = Current circuit
Fig.: Indication of exceeding
the measurement range in
the current circuit of the 2nd
phase (I2).
Fig.: Indication of exceeding
the measurement range in
voltage circuit L3
V = Voltage circuit
Fig.: Indication of exceeding
the measurement range in
current circuit I4
Summary of Contents for UMG 96 RM-PN
Page 123: ...123 UMG 96RM PN...
Page 128: ...128 UMG 96RM PN...
