File Version: 1.2
17
/
37
JAKA MiniCab Hardware User Manual
3.2.2 Installation Environment Requirements
MiniCab needs to be installed in a dry place with good ventilation and cooled by natural convection; when
there is a large amount of heat generated in the use scenarios, such as high-speed running, heavy load or
frequent braking, an external fan is required to cool the MiniCab. In order to ensure the MiniCab can be cooled
by a fan and natural convection, please refer to Figure 3-6 for installation, and reserve a distance of more than
100mm(3.94in) between each MiniCab (heat dissipation requirement), and reserve a distance of more than
50mm(1.97in) on both sides of the longitudinal direction.
Figure 3-6 Installation with Space Reserved
Note:
⚫
Do not install in damp or water spattering environment;
⚫
Do not use the equipment in the enclosed environment, which will cause high temperature, shorten
service life and even damage the equipment;
⚫
Keep away from heat sources such as stoves;
⚫
Do not use the product near corrosive and flammable gases, combustibles, such as hydrogen sulfide,
chlorine, ammonia, sulfur, chlorinated gases, acids, bases, salts, etc.;
⚫
This product is used at altitudes below 1000m(3280ft), and please de-rate if the altitude is above
1000m(3280ft).
