File Version: 1.2
16
/
37
JAKA MiniCab Hardware User Manual
3.2.1.2
Base Installation
Figure 3-4 Base Installation Schematic Diagram
MiniCab supports the bottom mounting and fixing mode, as shown in Figure 3-4. 4 M3 screws are selected for
fixing, and the dimention of the bottom mounting hole are shown in Figure 3-2. When the fixed plate is a moving
platform, in order to reduce the impact of moving vibration on MiniCab, it is recommended to add a rubber
washer between the MiniCab and the fixed plate.
3.2.1.3
Rear guide rail Installation
Figure 3-5 Rear rail Installation Diagram
MiniCab also supports rear installation of national standard guide rail, and the guide rail buckle is optional.
When there is a need for rear guide rail installation, please contact JAKA technical service personnel to
prepare before shipping or arrange a redelivery.
