51
item Controller BL 1-04 /C
― Product manual
Time
Description
Value
t
K1
Delay between the switching of S1 and the
closing of the undelayed contact K1
See the data sheet of the safety relay
t
K1_delay
Delay between S1 and the opening of the
off- delayed contacts K1
Can be adjusted on the safety relay
t
STOA/B OFF
STOA/B – switching time from high to low (See
also section Response time until power output
stage inactive and maximum OSSD test pulse
duration on page 48)
Maximum response time 5 ms
t
STOA/B ON
STOA/B – switching time from high to low
0.6 ms typ., 1 ms max
t
DRV
Delay of the internal sequence control of the
servo drive
10 ms max.
t
ENAB HI
Time that the servo drive enable signal (DIN5
or bus enable signal) must be low after
STOA/B has been reactivated and the status of
the STO circuit has changed
> 20 ms
t
A
Switch-off delay of the holding brake
t
F
Switch-on delay of the holding brake
8.12 MicroSD card
Communication interface
Value
File system
FAT16, FAT32
Connector type
microSD card
File names
Only file and folder names that comply with the 8.3 standard are supported.
