item Controller BL 1-04 /C
― Product manual
8
2 For your own safety
2.1 General information
Servo drives of the BL 1-04 /C series can only be used safely if you read and comply with this document.
The servo drive has a safe design. However, certain hazards exist in the context of certain activities. These hazards can be
avoided by following the correct procedures. The correct procedures for avoiding these hazards are described in this docu
-
ment.
In addition to the instructions described in this document, there may be additional health and safety instructions as well as
general safety instructions that you must comply with. Keep informed about all of these aspects.
Professional project planning is a prerequisite for the correct and trouble-free operation of the servo drive.
The following requirements must be fulfilled to ensure the trouble-free and safe operation of the servo drive.
▪ Proper and correct transport
▪ Proper storage
▪ Proper installation
▪ Proper project planning taking in consideration all of the potential risks, necessary protective and emergency measures
and the installation
▪ Careful operation and proper maintenance.
Only trained and qualified personnel in accordance with section 2.3 Target group on page 9 are authorised to work with or on
the electrical systems.The following instructions must be read and understood prior to the initial operation of the system in
order to prevent injuries and/or damage to property. The following safety instructions must be complied with at all times:
▪ Do not attempt to install or start the servo drive without having read all of the safety instructions in this document concern
-
ing the electrical drives and controllers. These safety instructions and all other user notes must be read prior to performing
any work with the servo drive.
▪ If the servo drive is sold, rented out or otherwise distributed to third parties, these safety instructions must be included.
▪ The user must not open the servo drive for safety and warranty reasons.
2.2 Intended use
The electronic drive control unit (servo drive) is intended for operation in combination with electric motors in an industrial
environment. The handling of the servo drive requires qualified personnel that have been trained in terms of general and, in
particular, electrical safety. The intended use also includes compliance with the information and instructions in this manual.
Any use going beyond or deviating from the intended use will be considered as misuse.
WARNING
Hazards caused by misuse
Misuse of the servo drive will lead to dangerous situations.
▪ Use the servo drive only under the ambient conditions that are specified in section 8.
▪ Do not use the servo drive outdoors or in explosive atmospheres.
▪ Use suitable and qualified specialist personnel for any type of work on the servo drive.
▪ Always comply with the voltage ranges that are specified in section 8 Technical data on page 33.
▪ Follow all of the instructions in this manual concerning the safe use of the servo drive.
