item Controller BL 1-04 /C
― Product manual
68
For optimal interference suppression on the analogue signal lines, the cores for the analogue signal must be shielded sepa
-
rately. It may be useful to run the analogue signal in a separate, shielded cable.
The servo drive provides an auxiliary voltage of 24 V. As a result, the inputs can be activated directly via switches.
The digital outputs are designed as so-called "high-side switches". This means that only these 24 V are supplied to the output
in the active state. In the passive state, the output has a high resistance and the level is defined only by the flyback diode and a
high internal resistance.
Configuration on the device [X1]
D-SUB connector, 25-pin type, female
Mating connector [X1]
• D-SUB connector, 25-pin type, male
• Housing for a 25-pin D-SUB connector with locking screws of type 4/40 UNC
