13
item Controller BL 1-04 /C
― Product manual
2.11 Protection during the handling and installation of the devices
CAUTION
Risk of injury caused by crushing, shearing, cutting or impacts
Improper handling and installation of certain parts will cause injuries. Always follow the safety instructions stated hereinbelow.
▪ When installing the servo drive, ensure that it can be installed, operated and removed without any danger.
▪ Appropriate installation clearances must also be defined.
▪ Comply with the intended use of the servo drive.
▪ When transporting the servo drive, pay particular attention to the edges and corners of housings and other components.
Use suitable personal protective equipment.
▪ If you install the components of the system on a wall or on the floor, dust may be created by drilling. Use suitable personal
protective equipment.
▪ Use only suitable installation and transport equipment.
▪ Prevent trapping and crushing by suitable protective measures.
▪ Use only suitable tools. If specified, use special tools.
▪ Use lifting equipment and tools in a proper manner.
▪ Do not step under suspended loads.
▪ Liquid spills on the floor must be removed immediately.
3 Product description
The servo drives of the smartServo BL 4000-C series are smart AC servo drives for controlling three-phase synchronous mo
-
tors, torque motors and linear motors. The servo drives can be used in a universal manner, since they can be combined with a
wide range of encoder systems and motors. Due to their extensive parameterisation options, they can be adapted to a variety
of different applications. Servo drives of the BL 4000-C series are intended for use as devices installed in control cabinets.
The connection to a superordinate control system can be realised by way of the integrated EtherCAT/Profinet or CAN inter
-
face.
Parameter sets that have been created for the Servo Positioning Controller C-Series series can be used for the BL 1-04 /C and
vice versa.
3.1 Type designation
Type key using the example of a BL 4104-C.
1
Type designation: Basic Line
2
Power line connection: single-phase
3
Nominal current in [A eff]
4
Cabinet (control cabinet device)
Figure 1: Nomenclature
BL
1
04
3
C
4
1
2
/
-
