Goodrive100 inverters
Fault tracking
IKR Aandrijven en Besturen
www.ikr-industries.nl
The right selection of Power surge depends on the supply power of the inverter. Single phase 230V AC/2A
power surge applied to the inverter with single/three-phase 230V AC as its input voltage. The inverter with
single/three-phase 230V AC as its input voltage can apply Single phase 230V AC/2A power surge. All DC
bus capacitors charge at the same time because there is one rectifier.
High-voltage inverter needs enough voltage (for example, 400V) during charging. The small capacitor
power (2A is enough) can be used because the capacitor nearly does not need current when charging.
Change electrolytic capacitors
Read and follow the instructions in chapter
Safety Precautions
. Ignoring the
instructions may cause physical injury or death, or damage to the equipment.
Change electrolytic capacitors if the working hours of electrolytic capacitors in the inverter are above 35000.
Please contact with the local INVT offices or diall our national service hotline (400-700-9997) for detailed
operation.
6.1.4 Power cable
Read and follow the instructions in chapter
Safety Precautions
. Ignoring the
instructions may cause physical injury or death, or damage to the equipment.
1. Stop the drive and disconnect it from the power line. Wait for at least the time designated on the inverter.
2. Check the tightness of the power cable connections.
3. Restore power.
6.2 Fault solution
Only qualified electricians are allowed to maintain the inverter. Read the safety
instructions in chapter Safety precautions before working on the inverter.
