Goodrive20-UL Series VFD
Function parameters
-96-
Function
code
Name
Description
Default Modify
14: Odd check (O,8,1) for ASCII
15: No check (N,8,2) for ASCII
16: Even check (E,8,2) for ASCII
17: Odd check (O,8,2) for ASCII
P14.03
Communicati
on answer
delay
0
–200ms
It means the interval time between the time
the VFD receives the data and the time it
sends it to the upper monitor. If the answer
delay is shorter than the system processing
time, then the answer delay time is the
system processing time, if the answer delay
is longer than the system processing time,
then after the system deal with the data,
waits until achieving the answer delay time to
send the data to the upper monitor.
5
○
P14.04
Communicati
on overtime
fault time
0.0 (invalid),0.1
–60.0s
When the function code is set as 0.0, the
communication overtime parameter is
invalid.
When the function code is set as non-zero, if
the interval time between two
communications exceeds the communication
overtime, the system will report "485
communication faults" (CE).
0.0s
○
P14.05
Transmission
fault
processing
0: Alarm and stop freely
1: No alarm and continue to run
2: No alarm and stop according to the stop
means (only under the communication
control)
3: No alarm and stop according to the stop
means (under all control modes)
0
○
P14.06
Communicati
on
processing
0x000
–0x111
Ones place: Write operation
0: Write with response: the VFD will respond
to all reading and writing commands of the
upper monitor.
1: Write without response: the VFD only
responds to the reading command of the
0x000
○
Summary of Contents for GD20-0R4G-2-UL
Page 1: ......
