Intermec Transaction Manager 9560, User Manual

Page: 222 / 309

Data Entry Commands - Reset
8-28
Reset
Purpose: Exits Configuration mode without updating the parameters. Clears the data
buffer.
Terminal /
Keyboard
Ctrl Z
Host:
- .
Scan:
Reset
*-.*
*-.*
Resume Program
Purpose: Resumes running an IRL program from the point where the previously run
program stopped. If none was stopped, this starts a new IRL program from
the beginning.
Note: If the program is resumed after prompts have been displayed,
the prompts are lost.
Terminal: Not Applicable
Keyboard:
Ctrl Enter R
Note: Simultaneously press Ctrl Enter, and then press R.
Host:
$ -
Scan:
Resume Program
*$.*
*$.*