Intermec Transaction Manager 9560, User Manual

Page: 56 / 309

9560 Transaction Manager User’s Manual
3-10
To connect to sense inputs
1. Determine the required terminal and jumper blocks, and then set the
jumpers for the sense inputs.
a. Use the following terminal and jumper blocks for each sense input:
Sense Input Terminal Block Jumper Block
1 J1 J5
2 J2 J6
3 J3 J7
b. Set the jumpers for the voltage levels for the sense inputs as follows:
For this voltage Set jumper pins
5V to 14V jumper pins 1 and 2
14V to 24V jumper pins 2 and 3.
2. Connect the external sense input device to posts 4 and 5 of the appropriate
terminal block. The switch mechanism on each device should normally be
open. Use the following diagram as a guide.
Sample Sense Input Application
Normally Open Door
Sense Switch
Secondary circuit of no
more than 24 VDC or VAC
and no more than 60 mA.
Terminal
Block
For 5-14V input, jumper pins 1 and 2.
For 14-24V input, jumper pins 2 and 3.
Input Range Selection
Jumper Block
Optical
Isolator
1 2 3
4 5
330
1200
External
9560
1 2 3
9560-03U