Intermec Transaction Manager 9560, User Manual

Page: 55 / 309

Installing the 9560
3-9
3
Connecting Input Devices
Connect the input device to the connector listed in the following table.
Model and Description Connect To
1260 and 1270 Series digital wands Wand (modular) connector
1350 Series badge scanners Wand (modular) connector
1500 and 1600 Series laser scanners
(with 9-pin D-sub connector) Laser scanner connector
1700 Keyboard Wand (modular) connector
9191 Digital Satellite Wand Station Wand (modular) connector
Any asynchronous CRT terminal Terminal plug
RS-232 magnetic stripe reader Terminal plug
Any asynchronous host computer Modem socket
Connecting to Sense Inputs
You use sense inputs to monitor conditions, such as a door opening or closing.
You connect the Sense input lines to terminals 4 and 5 of a terminal block. For
more information, see “Selecting External Devices” in Chapter 2.
Caution
Power to the sense inputs must be from a Class 2 circuit of 5V to 24V, 10mA to
60mA. Never connect main power lines directly to the inputs. Failure to
comply could result in equipment damage.
Conseil
Le courant utilisé par les lecteurs sensoriels doit provenir d'un circuit Classe 2
de 5V - 24V, 10mA - 60mA. Ne connectez jamais les lignes de courant
principales directement aux lecteurs, faute de quoi vous risquez d'endommager
l'équipement.