Intermec Transaction Manager 9560, User Manual

Page: 178 / 309

Configuration Commands - Scanner Timeout
7-46
Scanner Timeout
Purpose: Defines the maximum length of time the scanner stays on after the trigger is
pulled or after a label is passed through the slot.
Default: No timeout
Syntax:
SA data
or
IH data
Acceptable values for
data
are:
0 No timeout
1 - 60 1 - 60 msec
Scan: 1. Scan this label:
Set Scanner Timeout
*+/$+SA*
*+/$+SA*
2. Scan a label for 0 through 60 from the full ASCII chart in Appendix B,
“Full ASCII Chart.”
3. Scan this label:
Exit Configuration, Save Settings
*$-*
*$ - *