Intermec Transaction Manager 9560, User Manual

Page: 70 / 309

9560 Transaction Manager User’s Manual
4-8
The IRL control program and the magnetic card reader settings are explained
in Chapter 9, “Interactive Reader Language.”
For more information on the magnetic card reader specifications, refer to these
publications:
• ANSI X4.13-1983 Specifications for Credit Cards
• ANSI X4.16-1983 Financial Transaction Cards
• ISO 7811/2 THRU 5 Identification Cards Track 1 Thru 3
Using a Wand
You can use Intermec 1260 and 1270 series digital wands with the 9560. This
drawing shows how to correctly scan a label with the wand.
*LABEL*
17°
(Optimum)
35°
(Maximum)
*LABEL*
Correct Scanning Procedures
*LABEL*
*LABEL*
*LABEL*
*LABEL*
Incorrect Scanning Procedures
*LABEL*
Optimum Scanning Angle
9560-15U
To scan a label
1. Place the wand comfortably in your hand, as if it were a pencil, and touch
the tip to the label. Tilt the wand slightly as shown earlier.
2. Place the tip of the wand in the white area at the beginning or end of the
bar code.
3. Using very light pressure, draw an imaginary line through the entire bar
code without stopping. You can scan the bar code in either direction.