Intermec Transaction Manager 9560, User Manual

Page: 174 / 309

Configuration Commands - Records per Block
7-42
Records per Block
Purpose: Defines the maximum number of data records transmitted per block of data.
Usually files are transmitted record by record.
You must select the communications protocol before setting the parameters
that define the protocol.
Default:
All records within block
Syntax:
FC data
Acceptable values for
data
are:
0 All records within block
1-99 Number of records per block
Scan:
To set to all records, scan this label:
All
*$+FC0$-*
*$+FC0$-*
Or:
To set the number of records per block to 1 through 99:
1. Scan this label:
Set Records per Block
*+/$+FC*
*+/$+FC*
2. Scan a label for 1 through 99 from the full ASCII chart in
Appendix B, “Full ASCII Chart.”
3. Scan this label:
Exit Configuration, Save Settings
*$-*
*$ - *