Intermec Transaction Manager 9560, User Manual

Page: 136 / 309

Configuration Commands - ADDR (Address, Multidrop)
7-4
ADDR (Address, Multidrop)
Purpose: Defines the address of the communication port when using a Mutli-Drop
protocol. Each address has unique POL and SEL characters, which are
automatically set when the address is configured.
Default:
A
Syntax:
HC data
Acceptable values for
data
are:
A - Z, or 0 - 5
NUL = disable
Scan:
1. Scan the following label:
Enter Accumulate/Change Configuration/Address
*+/$+HC*
*+/$+HC*
2. Scan a bar code for
data
from the full ASCII chart in Appendix B, “Full
ASCII Chart.”
3. Scan the following label:
Exit Configuration, Save Settings
*$-*
*$ - *