Intermec Transaction Manager 9560, User Manual

Page: 106 / 309

9560 Transaction Manager User’s Manual
5-32
Full ASCII Mode
Full ASCII mode is a part of Data Entry mode that you use to enter or transmit
ASCII control characters or lowercase characters as data. When the reader is in
Full ASCII mode, it decodes alphanumeric characters as ASCII characters.
For example:
If the Reader Is And You Scan The Reader Records
In Full ASCII *$M* the ASCII control character
CR (0D Hex)
Out of Full ASCII *$M* 2 alphanumeric characters,
$ and M
In or Out *$* and *M* 2 alphanumeric characters,
of Full ASCII $ and M
See Chapter 8 “Data Entry Commands” for information on the Full ASCII
mode commands.
Command Types
The 9560 recognizes two types of commands: configuration commands and
data entry commands.
Configuration commands Set the reader operating parameters, bar codes,
communication protocol, and protocol characters. These settings are saved in
memory, even if the reader’s power is removed. When you scan the Default
Configuration label, the reader operating parameters return to the factory
default settings.
For the complete definition of all Configuration commands, see Chapter 7,
“Configuration Commands.”
Data Entry commands
Cause the reader to perform specific functions, such as
transmit data or sound beeps. When you scan a Default Configuration label,
changes you made with Data Entry commands are not saved.
For the complete definition of all Data Entry commands, see Chapter 8, “Data
Entry Commands.”