Intermec Transaction Manager 9560, User Manual

Page: 41 / 309

Preparing to Install the 9560
2-13
2
Connecting Directly to a Computer
You can connect a computer directly to the 9560 modem connector. If the
connector on the computer is a plug (not a socket), then use a socket/socket
adapter cable, such as Intermec Part No. 035009S. The 9560 modem connector
is wired as a Data Terminal Equipment (DTE) device.
Connecting to a Computer
Computer
Modem Connector
9560-06U
You need a null modem cable, such as Intermec Part No. 043069, or any other
null modem cable that meets these standards:
• 4-wire null modem cable
• 10-foot suggested length
• 25-pin D-subminiature connector that is compatible with the computer
• 25-pin, D-subminiature plug connector at one end
Connecting to a Computer and Terminal
If your system includes a computer and a terminal, connect the computer to
the 9560 modem connector first. Use a null modem cable as described in the
previous section, “Connecting Directly to a Computer.”
Next connect the CRT terminal or other ASCII device to the 9560 terminal
connector with a modem cable. The terminal connector is wired as a Data
Communications Equipment (DCE) device.