Intermec Transaction Manager 9560, User Manual

Page: 188 / 309

Configuration Commands - 2 of 5 (Two of Five)
7-56
2 of 5 (Two of Five)
Purpose: Enables or disables decoding of 2 of 5 symbology. If Interleaved 2 of 5 is
enabled, 2 of 5 is disabled.
Default: Disabled
Syntax:
CC data
data
must be 3 digits. Acceptable values are:
First digit:
0
3 bar start/stop
1 2 bar start/stop
Second and third digits:
00
Disable 2/5
01 - 32 Length
Scan: To disable 2 of 5, scan this label:
Disable 2 of 5
*$+CC000$-*
*$+CC000$-*
Or:
To enable 2 of 5:
1. Scan one of these labels:
2 of 5, 3 bar Start/Stop 2 of 5, 2 bar Start/Stop
*+/$+CC0* *+/$+CC1*
*+/$+CC0* *+/$+CC1*
2. Scan a label for a two digit number from 1 through 32 for the label length
from the full ASCII chart in Appendix B, “Full ASCII Chart.”
3. Scan this label:
Exit Configuration, Save Settings
*$-*
*$ - *