Intermec Transaction Manager 9560, User Manual

Page: 90 / 309

9560 Transaction Manager User’s Manual
5-16
This table lists valid reader settings for the terminal and reader.
Terminal Screen Formatting Reader Setting Protocol Choices
Reader formats terminal screen Buffered Point-to-Point
User-Defined
User-Defined
Multi-Drop
Polling Mode D
Multi-Drop
Host formats terminal screen Transparent Point-to-Point
User-Defined
User-Defined
Multi-Drop
Polling Mode D
Multi-Drop
Host formats terminal screen,
and uses full-duplex Nonbuffered, full-duplex Point-to-Point
User-Defined
Host formats the terminal screen,
and uses half-duplex Nonbuffered, half-duplex Point-to-Point
User-Defined
“Smart” terminal that can buffer several
blocks of data Block operation Point-to-Point
User-Defined
Buffered Terminal Operation
In buffered operation, the reader is usually connected to a port concentrator
through the modem port and to the terminal through the terminal port. The
reader emulates a smart terminal for batching transmissions to the host.
The reader buffers data from both the terminal and scanner, and then formats
and displays that data on the terminal screen. The reader echoes input from the
terminal until you send a command to transmit the data. The reader transmits
the data to the host when one of these events occurs:
• The reader receives a Transmit command.
• The reader scans a regular label.
• You press Enter from the terminal keyboard.
You can use host control characters to format the terminal screen and display
messages from the host. The terminal also displays communication
diagnostics.