Intermec Transaction Manager 9560, User Manual

Page: 204 / 309

Data Entry Commands - Enable Clock
8-10
Enable Clock
Purpose: Sets the real time clock.
Format:
YY/MM/DD:HH:MM
MM/DD:HH:MM
DD:HH:MM
HH:MM
MM
If
data
does not match one of these formats, the reader sounds an error
beep and ignores the command.
If you omit
data
, the display prompts you for each clock element
separately. Enter the digits followed by Enter for each clock element prompt.
Press [Bksp] on the keyboard or scan the Backspace command to remove the
last digit entered.
If you press Enter at a prompt without entering data, the remaining clock
elements are set to the default values.
Terminal /
Keyboard
Ctrl T
Host:
/+ data
Scan:
1. Scan this label:
Enable Clock
*/+*
*/+*
2. Scan
data
from the full ASCII chart in appendix B, “Full ASCII
Chart.”