Intermec Transaction Manager 9560, User Manual

Page: 69 / 309

Operating the 9560
4-7
4
Using the Magnetic Card Reader
The 9560 requires an IRL program to use the magnetic card reader. When you
order the 9560 with an internal magnetic card reader, the IRL control program
is already installed on the unit and on a disk.
The magnetic card reader accepts magnetic cards that meet ANSI and ISO
specifications for Track 2. Track 2 only encodes numeric data.
To use the card reader
1. Download the IRL program that controls the card reader to the 9560. By
default, the program is downloaded at the factory.
2. If you are not using the factory default settings, configure the 9560
communications settings for 9600 baud, 7 data bits, 1 stop bit, and even
parity. See Chapter 7, “Configuration Commands,” or scan this label:
9600 Baud, 7 Data Bits, 1 Stop Bit, Even Parity
*+/$+IA6II7IB1IC1$-*
*+/$+IA6II7IB1IC1$-*
3. Slide a card with a magnetic stripe through the slot, in either direction.
Make sure that the magnetic stripe is facing up towards the top of the unit.
Magnetic Strip Reader
9560-48U
9560
7
8
9
4
5
6
1
2
3
-
0
.
Bksp
Space
Enter
F1
F6
F2
F7
F3
F8
F4
F9
F5
F10
Intermec
A Litton Company