Intermec Transaction Manager 9560, User Manual

Page: 118 / 309

9560 Transaction Manager User’s Manual
6-12
Using Prompting Configuration Mode
In Prompting Configuration, the 9560 prompts you step by step through all
configuration tasks. The reader displays a prompt for each option within each
parameter, beginning with the current setting. You can change each setting or
accept it as is.
The following pages explain how to enter Prompting Configuration, how to
move around, and how to exit. The Standard Display Prompts table and Large-
Type Display Prompts table list the configuration prompts and their options.
The options are the same for the standard and large-type displays, but the
prompts are different.
Entering Prompting Configuration Mode
1. Make sure that the reader is plugged in and the power is on.
2. If the reader is connected to a CRT terminal, set the reader for buffered or
transparent display to match the terminal setting. Scan one of these labels:
Buffered
*$+OC1$-*
*$+OC1$-*
Transparent
*$+OC2$-*
*$+OC2$-*
3. Enter Prompting Configuration mode. Press Ctrl E from the keyboard or
scan this label:
Enter Prompting Configuration
*$+$+*
*$+$+*
The 9560 sounds one low beep and the reader displays the first Prompting
Configuration screen.
<?>HELP <CR>START
Use the following sections and tables to change your settings in Prompting
Configuration mode.