Intermec Transaction Manager 9560, User Manual

Page: 127 / 309

Configuring the 9560
6-21
6
Large-Type Display Prompts
This table lists the configuration prompts and options for the large-type 1x20
character display. The options are the same for the standard and large-type
displays, but the prompts are shorter for the large-type display. The prompts
are listed in the order they appear.
For information on using Prompting Configuration, see “Entering Prompting
Configuration Mode” or “Moving Around in Prompting Configuration Mode”
earlier in this chapter.
Configuration Prompts for 1x20 Display
Prompt Options Comments
<?>HELP <CR> START
Type ? to view help prompts, or press Enter to
configure.
SELECT CODES NO NO
YES Selecting No skips the following options and
displays the OP PARAMETERS prompt.
CODE 39 NO CK DIGIT NO CK DIGIT
CK DIGIT
HIBC
DISABLE
FL ASCI C39 DISABLE DISABLE
ENABLE
I 2/5 VARIABLE VARIABLE
CASECODE
FIXED LENGTH
DISABLE Fixed length requires an even-numbered
length.
UPCA/EAN13 ENABLE ENABLE
UPC A ONLY
DISABLE
UPC VER E ENABLE ENABLE
DISABLE
EAN-8 ENABLE ENABLE
DISABLE
SUPPLEMENTLS ENABLE ENABLE
DISABLE
CODABAR STANDARD STANDARD
CONCATENATED
DISABLE
ABC
START / STOP ABCD ABCD
DC1-DC4
DISABLE