Intermec Transaction Manager 9560, User Manual

Page: 120 / 309

9560 Transaction Manager User’s Manual
6-14
Finding Help in Prompting Configuration Mode
You can use the help command anytime in Prompting Configuration. When
you type the question mark
?
, the 9560 displays the commands that Prompting
Configuration recognizes, one screen at a time.
To enter Help, press ?.
To move forward in Help, press Enter.
To move backward in Help, press Bksp.
To exit Help:
1. Scroll through to the beginning or end of the help prompts.
2. At the first prompt, press #.
Or, at the last prompt, press Enter.
The screen returns to the prompt shown prior to entering Help mode.
Exiting Prompting Configuration Mode
You have two ways to exit Prompting Configuration mode:
• To exit and update the parameters, press Esc or scan:
*$-*
*$-*
• To exit without updating the parameters, press Ctrl Z or scan:
*-.*
*-.*
Prompting Configuration Mode Example
In this example, the reader is not connected to a CRT, and you want to disable
Code 93. The reader has the large character 1x20 display. Follow these steps:
1. Scan the Prompting Configuration label.
Enter Prompting Configuration
*$+$+*
*$+$+*
The 9560 displays this prompt:
<?>HELP <CR>START
2. Press Enter. The 9560 displays this prompt: