Intergraph TDZ-400 Deskside, Setup And Maintenance Manual

Page: 45 / 136

Chapter 3- Opening and Closing the Base Unit 31
➤
To attach a reusable antistatic wrist strap:
1. Attach an antistatic wrist strap to the ground loop as shown in the
following figure.
2. Slip the elastic end of the wrist strap snugly around your bare wrist.
Note: The metal conductor bead in the elastic must contact bare skin.
Closing the Base Unit
After performing the maintenance or system upgrade, follow these steps.
When securing panels with screws, ensure the screws are tight, but do not
strip the screw heads.
➤
To close the base unit:
1. Remove the antistatic wrist strap from the chassis.
2. Replace the PCI access panel if removed.
Ground
Loop