Intergraph TDZ-400 Deskside, Setup And Maintenance Manual

Page: 23 / 136

Chapter 1 - Getting Started 9
➤
To start the system:
1. Press the power switch on the base unit and the power switch on the
monitor to turn on power to the system. The following events occur:
♦
The power on LED lights green.
♦
The CD-ROM drive LED blinks green and amber.
♦
The BIOS boot screen displays the American Megatrends logo.
♦
The boot screen displays.
2. At the initial Windows NT boot screen, select the following option:
Windows NT Workstation 3.51 [VGA Mode]
After additional messages display, Windows NT Workstation starts in
VGA mode, allowing you to log on and configure your system’s date,
time, and video display.
3. Press
CTRL
+
ALT
+
DELETE
to display the Windows NT Workstation
logon dialog. The first time the logon dialog displays,
Administrator
displays in the Username box. The From and
Password boxes are blank.
4. Select OK or press
ENTER
to log on to Windows NT Workstation. For
instructions to create a user account and join a workgroup or domain,
refer to the online Windows NT Workstation System Guide.
5. Use the Date/Time application in the Windows NT Control Panel to
set the system date and time. Refer to the online Windows NT
Workstation System Guide for instructions on using the applications in
the Control Panel.
6. Configure the video display and TCP/IP networking software as
described in Chapter 2, “Configuring the System.”