Intergraph TDZ-400 Deskside, Setup And Maintenance Manual, Page: 87 / 136

Chapter 6 - GLZ Graphics 73
5. Secure the board to the workstation using the screw removed
previously.
6. For dual-screen options, reconnect the clock sync cable.
Note: The clock sync cable is keyed so that it can be installed in only one
orientation.
GLZ1T and GLZ5
GLZ1T and GLZ5 consist of two boards permanently joined into one
module, which must be removed as one unit. Refer to the following figure.
➤
To replace a GLZ1T or GLZ5 module:
1. If a dual-screen option is installed, disconnect the clock sync cable.
2. Using a quarter-inch nutdriver, remove the screws securing the
module to the workstation. Retain the screws.
Screw
Clock Sync
Cable (Dual-
screen only)
GLZ1T
Module