Intergraph TDZ-400 Deskside, Setup And Maintenance Manual, Page: 41 / 136

Chapter 3- Opening and Closing the Base Unit 27
➤
To remove the PCI access panel:
1. Power off the base unit and remove the top cover and side panel. Lay
the base unit on the right side.
2. Remove the two screws at the bottom of the unit and the screw behind
the PCI access panel as shown in the following figure.
3. Slide the cover to the back of the base unit and remove it.
Removing the Option Board Bracket
➤
To remove the option board bracket:
1. Remove the PCI access panel as described previously.
2. Remove the graphics boards and other installed PCI option boards.
PCI Access
Panel
Screws
Screw
(Behind Panel)