Intergraph TDZ-400 Deskside, Setup And Maintenance Manual

Page: 114 / 136

100 Appendix A - Installing System Software
CD-ROM, key in the following when asked for the path to the file, where
drive is the drive letter for the CD-ROM drive:
drive:\i386
q
Select Express Setup
Express Setup automatically detects the Adaptec SCSI driver for all systems,
and the MPS 1.1 Multiprocessor for all dual-processor systems.
If you select Custom Setup on certain Intergraph systems, Setup does not
detect the MPS 1.1 Multiprocessor, and you must manually select MPS 1.1
Multiprocessor during the installation. If you select Custom Setup, make
sure to change the
Computer:Standard PC
option to
MPS 1.1
Multiprocessor
on the Hardware and Software Components menu, which
displays after Setup detects the SCSI adapter.
q
Select New installation
When prompted by Setup, do the following:
♦
Select New installation.
♦
Select the appropriate file system type and partition.
♦
Select the destination path for Windows NT Workstation.
q
Configure Windows NT Workstation
Specify information such as your logon username, computer name, and local
language.
q
Configure the network adapter driver
Setup detects the AMD PCnet Ethernet Family network adapter driver.
When prompted, select OK to automatically configure the driver. Refer to
the Windows NT Workstation System Guide for more information about
installing and configuring network adapter drivers.
q
Configure the networking protocols
During initial installation, Setup allows you to select and configure
networking protocols on your system. If your system uses TCP/IP, note the
following when using the Windows NT Workstation Installation Guide to
install and configure TCP/IP software: