Intergraph TDZ-400 Deskside, Setup And Maintenance Manual

Page: 29 / 136

15
Chapter 2
Configuring the System
After setting up the system hardware and starting the system for the first
time, you can configure it for your use. Follow the instructions in this
chapter to configure the system’s video display and TCP/IP networking
software.
Before You Begin
Before you begin configuring the system, get and record the following
TCP/IP networking information from your network administrator:
♦
Internet Protocol (IP) address for
your system:
♦
IP subnet mask for your system:
♦
IP domain name for your network:
♦
IP address for your network’s
default gateway:
♦
IP addresses for your network’s
Domain Name System (DNS)
servers, if any:
The Windows NT delivery media contain software and drivers for both
Reduced Instruction Set Computing (RISC)- and Intel-based systems. When
installing Windows NT distribution files, make sure to install them from the
\I386 directory (the Intel software directory) on the delivery media. For
example, if you are installing a device driver from the Windows NT
CD-ROM, key in the following when asked for the path to the file, where
drive is the drive letter for the CD-ROM drive:
drive:\i386