Appendix B - Hardware Information 115
Jumper
Connector
2x
5/2x
3x
7/2x
4x
5x
J49
IN
IN
IN
IN
IN
IN
J50
IN
OUT
IN
OUT
IN
IN
J47
IN
IN
IN
IN
OUT
OUT
J48
IN
IN
OUT
OUT
IN
OUT
The following figure shows the detail of the CPU frequency jumper
connectors.
G95 VGA Mode Disable/Enable
The 2-pin connector labeled J26 on the system board enables or disables the
G95 VGA mode. If the jumper is not installed (default), the VGA mode is
enabled. If the jumper is installed, the VGA mode is disabled.
Vibra 16S Sound Disable/Enable
The 3-pin connector labeled J24 on the system board enables or disables the
integrated sound. If a jumper is installed on pins 2-3 (default), the integrated
Jumpers for
Secondary
CPU
Jumpers
for
Primary
CPU
J63
J62
J60
J61
J49
J50
J48
J47
Summary of Contents for TDZ-400 Deskside
