-42-
2 Installation
Each servo drive is equipped with two dust-proof covers in standard configuration. Such dust-proof
covers can be purchased separately as needed (model: NEX-02-N2B; manufacturer: PINGOOD).
Figure 2-8
Mounting of the dust-proof cover
NOTE
◆
Dust-proof cover: Prevents foreign objects (such as solids or liquids) from falling into the product
and causing faults.
◆
The dust-proof cover is delivered along with the servo drive. Keep the dust-proof cover in a proper
place.
2.2 Installation of the Servo Motor
2.2.1 Installation Location
■
Install the servo motor in a place free from corrosive and inflammable gases and combustible
materials, such as the hydrogen sulfide, chlorine, anmonia, sulphur gas, chloridize gas, acid, soda
and salt.
■
Use the servo motor with oil sealing when the motor is used in a place with grinding fluids, oil mists,
iron powders or cuttings.
■
Install the servo motor away from heating sources such as a heating stove.
■
Do not use the servo motor in an enclosed environment. Running in an enclosed environment may
cause motor overheat, shortening its service life.
2.2.2 Environment Conditions
Table 2-2
Installation environment
Item
Description
Ambient temperature
0℃ to 40℃ (non-freezing)
Ambient humidity
20% to 80% RH (without condensation)
Storage temperature
-20℃ to +60℃ (peak temperature: 80℃ for 72 hours)
Storage humidity
20% to 90% RH (without condensation)
Vibration
Below 49 m/s
2
Impact
Below 490 m/s
2
