-37-
2 Installation
2 Installation
8"3/*/(
i
Read through the safety instructions in
. Failure to comply may result in
serious consequences.
$"65*0/
◆
Abide by the installation direction described in this chapter. Failure to comply may result in
device faults or damages.
◆
Do not run a damaged or defective device. Failure to comply will result in physical injuries.
◆
Do not install the device in an environment exposed to water or corrosive matters. Failure to
comply will result in device faults.
◆
Do not install the device near combustible gases or combustible materials. Failure to comply
will result in a fire or electric shock.
◆
Install the device inside a fire-proof cabinet with electrical protections. Failure to comply may
result in a fire.
◆
Ensure the specified spacing is reserved between the servo drive and the interior surface of the
electric cabinet and other machines. Failure to comply will result in a fire or device faults.
◆
Do not put heavy objects on the device. Failure to comply may result in physical injuries or
device damages.
◆
Do not exert large impact force on the device. Failure to comply may result in device damages.
◆
Do not block the air inlet/outlet port of the servo drive, or allow foreign matters to fall into the
device. Failure to comply may result in a fire or device faults.
2.1 Installation of the Servo Drive
2.1.1 Installation Location
■
Install the servo drive into a cabinet free from sunlight and rain.
■
Install the servo drive in a place that meets the following requirements:
a) Free from corrosive and inflammable gases and combustible materials, such as the hydrogen sulfide,
chlorine, anmonia, sulphur gas, chloridize gas, acid, soda and salt
b) Free from high temperature, humidity, dusts and metal powders
c) Free from vibration
d) Pollution degree: PD2
