Appendix A Parameter Table
- 91 -
Param.
No.
Param. Name
Setting Range
Default
Property
Group A0: Torque Control and Limit Parameters
A0-00 Speed/Torque control 0: Speed control
1: Torque control
0
★
A0-01
Torque reference
channel selection in
torque control
0: Digital setting 1 (A0-03)
1: AI1
2: AI2
4: Pulse setting (DIO1)
5: Communication setting (1000H)
6: Min. (AI1, AI2)
7: Max. (AI1, AI2)
(100.0% of the values 1 to 7 corresponding
to A0-03)
0
★
A0-03 Torque digital setting
-200.0% to 200.0%
100.0%
☆
A0-04
Torque filter time
0s to 5.000s
0.000s
☆
A0-05 Speed limit digital
setting
-120.0% to 120.0%
0.00%
☆
A0-07 Acceleration time
(torque)
0.0s to 650.00s
1.00s
☆
A0-08 Deceleration time
(torque)
0.0s to 650.00s
1.00s
☆
A0-09 Setting channel of
speed limit
0: Set by A0-05
1: Frequency reference
0
☆
A0-10
Speed limit offset
0 to F0-10 (Maximum frequency)
5.00 Hz
☆
A0-11
Effective mode of
speed limit offset
0: Bidirectional offset effective
1: Unidirectional offset effective
1
★
A0-12 Frequency accelera-
tion time
0.0s to 6500.0s
1.0s
☆
A0-13 Frequency decelera-
tion time
0.0s to 6500.0s
1.0s
☆
A0-14 Torque mode swi-
tchover
0: No switchover
1: Switchover to speed control at stop
2: Target torque at stop being 0
1
★
Group A1: Virtual DI/DO
A1-00 VDI1 function selec-
tion
Refer to the description of F4-00.
0
★
A1-01 VDI2 function selec-
tion
Refer to the description of F4-00.
0
★
A1-02 VDI3 function selec-
tion
Refer to the description of F4-00.
0
★
A1-03 VDI4 function selec-
tion
Refer to the description of F4-00.
0
★
A1-04 VDI5 function selec-
tion
Refer to the description of F4-00.
0
★
