Inovance CP700 Series, User Manual

Page: 85 / 114

Appendix A Parameter Table
- 84 -
Param.
No.
Param. Name Setting Range Default Property
Fb-09 Designated count
value
1 to 65535 1000 ☆
Fb-10 Reset mode of revolu-
tion counting
0: Edge
1: Level
0 ☆
Fb-11 Reset signal of revolu-
tion counting
0: Retain
1: Reset
0 ☆
Fb-12 Calculation retentive
at power failure
0: Disabled
1: Enabled
0 ☆
Fb-13 Initial value of revolu-
tions
0 to 65535 (Fb-18 = 0)
0.0 to 6553.5 (Fb-18 = 1)
0 ☆
Fb-14 Numerator of drive
ratio
1 to 65535 1 ☆
Fb-15 Denominator of drive
ratio
1 to 65535 1 ☆
Fb-16 Actual running revo-
lutions (+ FB-13)
0 to 65535 (Fb-18 = 0)
0.0 to 6553.5 (Fb-18 = 1)
0 ●
Fb-17 Running revolutions 0 to 65535 (Fb-18 = 0)
0.0 to 6553.5 (Fb-18 = 1)
0 ●
Fb-18 Revolution counting
accuracy
0: 1
1: 0.1
0 ☆
Fb-19 Revolution counting
direction
0: Same direction
1: Reverse direction
0 ☆
Group FC: Multi-Reference and Simple PLC Function
FC-00 Reference 0 -100.0% to 100.0% 0.0% ☆
FC-01 Reference 1 -100.0% to 100.0% 0.0% ☆
FC-02 Reference 2 -100.0% to 100.0% 0.0% ☆
FC-03 Reference 3 -100.0% to 100.0% 0.0% ☆
FC-04 Reference 4 -100.0% to 100.0% 0.0% ☆
FC-05 Reference 5 -100.0% to 100.0% 0.0% ☆
FC-06 Reference 6 -100.0% to 100.0% 0.0% ☆
FC-07 Reference 7 -100.0% to 100.0% 0.0% ☆
FC-08 Reference 8 -100.0% to 100.0% 0.0% ☆
FC-09 Reference 9 -100.0% to 100.0% 0.0% ☆
FC-10 Reference 10 -100.0% to 100.0% 0.0% ☆
FC-11 Reference 11 -100.0% to 100.0% 0.0% ☆
FC-12 Reference 12 -100.0% to 100.0% 0.0% ☆
FC-13 Reference 13 -100.0% to 100.0% 0.0% ☆
FC-14 Reference 14 -100.0% to 100.0% 0.0% ☆
FC-15 Reference 15 -100.0% to 100.0% 0.0% ☆
FC-16 Simple PLC running
mode
0: Stop after running for one cycle
1: Keep final values after running for one
cycle
2: Repeat after running for one cycle
0 ☆