Appendix A Parameter Table
- 70 -
Param.
No.
Param. Name
Setting Range
Default
Property
F5-01 FMR output function
selection
0: No function
1: AC drive running
2: Fault output (stop
upon fault)
3: Frequency-level
detection output
4: Frequency reached
5: Zero-speed run-
ning (no output at
stop)
6: Motor overload
pre-warning
7: AC drive overload
pre-warning
8: Set count value
reached
9: Designated count
value reached
10: Length reached
11: PLC cycle com-
pleted
12: Accumulative run-
ning time reached
13: Frequency limited
14: Torque limited
15: Ready for run
16: AI1 > AI2
17: Frequency upper
limit reached
18: Frequency lower
limit reached (related
to running)
19: Undervoltage
state output
20: Communication
setting
23: Zero-speed running
2 (having output at
stop)
24: Accumulative pow-
er-on time reached
25: Frequency-level
detection 2 output
26: Frequency 1
reached output
27: Frequency 2
reached output
28: Current 1 reached
output
29: Current 2 reached
output
30: Timing reached
output
31: AI1 input limit
exceeded
32: AC drive output load
loss
33:Reverse running
34: Zero current state
35: IGBT temperature
reached
36: Output current limit
exceeded
37: Frequency lower
limit reached (having
output at stop)
38: Abnormality output
(direct output at fault
or warning)
39: Motor overheat
pre-warning
40: Current running
time reached
41: Fault output 2
42: Fault output 3
43: Position lock en-
abled
0
☆
F5-02 Relay function selec-
tion
2
☆
F5-03
Second solenoid valve
action selection
(T2A–T2C)
1
F5-04 DO1 function selection
0
☆
